Download Or Upload A Configuration File Via Tftp; Configuration File Upload; Figure 115. Configuration Upload/Download Via Tftp Page - Allied Telesis AT-GS950/8 User Manual

Chapter 24: Management Software Updates

Download or Upload a Configuration File via TFTP

Configuration
File Upload
318
This section describes how to download or upload a configuration file
using TFTP on an TFTP server. Before uploading or downloading a
configuration file onto the switch using TFTP, note the following:
Your network must have a TFTP server.

You must specify the path to the configuration file on the TFTP server.

Start the TFTP server software before you begin the download

procedure.
To download or upload an AT-S107 configuration file onto the switch using
a TFTP server, perform the following procedure:
1. From the menu on the left side of the home page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select the Config File Upload/Download
folder.
The Config File Upload/Download folder expands.
3. From the Config File Upload/Down folder, select via TFTP.
The Configuration Upload/Download via TFTP Page is displayed. See
Figure 115.

Figure 115. Configuration Upload/Download via TFTP Page

4. Enter the IP address of the TFTP server in the field next to the TFTP
Server IP parameter.
To upload an AT-S107 configuration file onto the switch, perform the
following procedure:
1. Select the Upload button to upload a configuration file from the switch
onto the TFTP server.
2. The software immediately begins to upload the configuration file from
the switch to the TFTP server.