Modify User Name And Password; Figure 11. Modify Administration Page - Allied Telesis AT-GS950/8 User Manual

4. To add a password that corresponds to the user name entered in
5. To confirm the password entry, retype the password in the box next to
6. Click Add to activate your changes on the switch.
7. From the main menu on the left side of the page, select Save
Modify User
To modify the a user name password, perform the following procedure:
Name and
1. From the main menu on the left side of the page, click the System
Password
2. From the System folder, select Administration.
3. Identify the user name that you want to change and click Modify in the
4. To change a password, enter a password of up to 12 alphanumeric
5. To confirm the above password, retype the password in the box next to
6. Click Apply to activate your changes on the switch.
7. From the main menu on the left side of the page, select Save
step 3, enter a password of up to 12 alphanumeric characters in the
box next to the Password field. The Password field is case sensitive.
the Confirm Password field.
Configuration to Flash to permanently save your changes.
folder.
The System folder expands.
The Administration Page is shown in Figure 10 on page 40.
Action column.
The Modify Administration Page is displayed. See Figure 11.
Note
The default user name cannot be modified or deleted. The default
password can be modified.

Figure 11. Modify Administration Page

characters in the box next to the Password field.
the Confirm Password field.
Configuration to Flash to permanently save your changes.
AT-GS950/8 Web Interface User Guide
41