Delete Policy; Figure 76. Modify Policy Page - Allied Telesis AT-GS950/8 User Manual

4. Change the parameters as required.
5. Click Apply.
6. From the main menu on the left side of the page, select Save

Delete Policy

To delete a Policy entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access

Figure 76. Modify Policy Page

Note
See "Create Policy" on page 198 for the definitions of each
parameters.
The modified Policy entry is displayed in the table at the bottom of the
page of the Create Policy page.
Configuration to Flash to permanently save your changes.
Control Config folder.
The Access Control Config folder expands.
AT-GS950/8 Web Interface User Guide
201