Set Alertmail Smtpserver; Set Oa Gateway; Set Oa Name - HP Xw460c - ProLiant - Blade Workstation User Manual

Hp bladesystem onboard administrator command line interface user guide version 2.60
Hide thumbs Also See for Xw460c - ProLiant - Blade Workstation:
Table of Contents

Advertisement

Restrictions:
None

SET ALERTMAIL SMTPSERVER

Command:
SET ALERTMAIL SMTPSERVER <ip address>
Description:
Sets the AlertMaill SMTP server. This is the mail server where the Onboard Administrator delivers its
email-based events.
Access level/Bay level
Administrator, OA operator
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.

SET OA GATEWAY

Command:
SET OA GATEWAY [<bay number>] <ip address>
Description:
Sets the network default gateway.
o
This command is used if the system is configured to use a static IP address.
o
If you do not specify a bay number, the command defaults to the active Onboard Administrator.
o
Access level/Bay level:
OA administrator, OA operator
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.

SET OA NAME

Command:
SET OA NAME [<bay number>] "<OA name>"
Description:
Sets the Onboard Administrator name. If a bay number is not specified, the command defaults to the
active Onboard Administrator.
Access level/Bay level:
OA administrator, OA operator
Restrictions:
The Onboard Administrator name is 1 to 32 characters long including all alphanumeric characters
and the dash (-).
Enclosure network configuration commands 63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bladesystem onboard administrator

Table of Contents