Show Device Serial_Number Blade; Show Interconnect Sessions - HP Xw460c - ProLiant - Blade Workstation User Manual

>SHOW SYSLOG SETTINGS
Remote log: Disabled
Address:
Port: 514
>SHOW VCMODE
Virtual Connect Mode: Enabled
Virtual Connect URL: http://16.84.190.143/
Virtual Connect Domain Name: gui_shorty_vc_domain

SHOW DEVICE SERIAL_NUMBER BLADE

•
Command:
SHOW DEVICE SERIAL_NUMBER BLADE <bay number>
•
Description:
Shows the specified direct attached blade device serial number
•
Access level/Bay level:
All
o
Bay specific
o
•
Restrictions:
Dependent on bay privileges
Example
OA-0016355E560A> SHOW DEVICE SERIAL_NUMBER BLADE
Blade 1 serial number: USM81500RP

SHOW INTERCONNECT SESSIONS

•
Command:
SHOW INTERCONNECT SESSIONS
•
Description:
Displays which users have serial console sessions in progress for each interconnect
•
Access level/Bay level:
OA administrator, OA operator
o
Bay specific
o
•
Restrictions:
You must have access to the specified bay.
Example
OA-0018FE27577F> SHOW INTERCONNECT SESSION
Interconnect Bay
------------------
No Interconnect remote console sessions were detected.
User
--------------
General management commands 48