Reboot Server; Set Nic; Set Server Boot - HP Xw460c - ProLiant - Blade Workstation User Manual

REBOOT SERVER

•
Command:
REBOOT SERVER {ALL | <bay number> [{ - | , } <bay number>]} [FORCE]
[{NORMAL |PXE | HDD | RBSU}]
•
Description:
Sends a request to the blade to perform a graceful shutdown.
o
The blade is then powered on.
o
If no blade is in the specified bay, you are notified that the bay is empty.
o
•
Access level/Bay level:
Administrator, operator
Bay specific
•
Restrictions:
You must have access to the specified bay number.
o
This command is not applicable to storage blades.
o

SET NIC

•
Command:
SET NIC {AUTO | FORCED}
•
Description:
Configures the external NIC for Auto-negotiation or forced link settings.
•
Access level/Bay level:
OA administrator
•
Restrictions:
None

SET SERVER BOOT

•
Command:
SET SERVER BOOT {FIRST | ONCE} {NORMAL | HDD | PXE | RBSU } {ALL | <bay
number> [{ - | , } <bay number>]}
•
Description:
Sets the server boot order to hard disk (HDD) or PXE. This stores a setting for the IPL to be passed
o
to the severs specified at the next reboot.
SET SERVER BOOT FIRST sets the boot order of the blade.
o
SET SERVER BOOT ONCE sets the boot device to be used on the next boot of the bays
o
specified; the RBSU option is only available for SET SERVER BOOT ONCE.
•
Access level/Bay level:
Administrator, operator
Blade management commands 97