Enable Ldap; Remove Ldap Certificate; Remove Ldap Group - HP Xw460c - ProLiant - Blade Workstation User Manual

•
Access level/Bay level:
OA administrator
•
Restrictions:
None

ENABLE LDAP

NOTE:
unavailable, you can recover by booting into Lost Password mode.
When booting in Lost Password mode, the local Administrator password will be reset, LDAP is
disabled, and Local Logins are re-enabled
•
Command:
ENABLE LDAP [NOLOCAL]
•
Description:
Enables directory authentication. If you use the NOLOCAL option, local users are not enabled.
•
Access level/Bay level:
OA administrator
•
Restrictions:
Before you can enable LDAP, configuration must be complete.

REMOVE LDAP CERTIFICATE

•
Command:
REMOVE LDAP CERTIFICATE "<certificate name>"
•
Description:
Removes the trust certificate corresponding to the MD5 <certificate name>.
o
This command revokes trust in the LDAP server associated with the certificate.
o
•
Access level/Bay level:
OA administrator
•
Restrictions:
None

REMOVE LDAP GROUP

•
Command:
REMOVE LDAP GROUP {ALL | "<group name>"}
•
Description:
Removes the LDAP group from the system. If you specify ALL, then all LDAP groups are removed
from the system.
•
Access level/Bay level:
If LDAP is enabled, local accounts are disabled, and the LDAP server becomes
Directory commands 33