Remove Trusted Host; Set Alertmail Mailbox; Set Alertmail Senderdomain - HP Xw460c - ProLiant - Blade Workstation User Manual

Removes an IP address from the list of systems that receive SNMP traps. If the same IP address is
listed multiple times with different communities, all instances of the IP address disappear unless
<community> specifies which one is to be removed.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.

REMOVE TRUSTED HOST

•
Command:
REMOVE TRUSTED HOST <ip address>
•
Description:
Removes an IP address from the list of systems allowed to connect to the Onboard Administrator
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255
(for example, 192.168.1.0).

SET ALERTMAIL MAILBOX

•
Command:
SET ALERTMAIL MAILBOX "<email address>"
•
Description:
Sets the email address where events are sent
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None

SET ALERTMAIL SENDERDOMAIN

•
Command:
SET ALERTMAIL SENDERDOMAIN "<domain>"
•
Description:
Sets the AlertMail domain. This is the DNS domain where the Onboard Administrator is located (for
example, AB.com).
•
Access level/Bay level:
OA administrator, OA operator
Enclosure network configuration commands 62