Update Ilo; Update Image - HP Xw460c - ProLiant - Blade Workstation User Manual

TRAY | BladeSystem c3000 Onboard Administrator
LCD | BladeSystem c3000 Insight Display
FAN | Active Cool 200 Fan
FAN | Active Cool 200 Fan
FAN | Active Cool 200 Fan
FAN | Active Cool 200 Fan
FAN | Active Cool 200 Fan
FAN | Active Cool 200 Fan

UPDATE ILO

•
Command:
UPDATE ILO {ALL | <bay number> [{ , | - } <bay number>]} <url>
•
Description:
The iLO command downloads a new flash image from the network and uses it to update the
o
firmware for iLO.
Supported protocols are HTTP, HTTPS, TFTP, and FTP
o
The URL should be formatted as protocol://host/path/filename.
o
If your ftp server does not support anonymous logins, a username and password can be
o
specified within the URL that is formatted as: ftp://username/password@host/path/filename.
•
Access level/Bay level:
Administrator
Blade bay
•
Restrictions:
This command is not applicable to HP Integrity server blades.

UPDATE IMAGE

•
Command:
UPDATE IMAGE {[FORCE] <url> | SYNC}
•
Description:
Downloads a new flash image from the network and uses the image to update the Onboard
Administrator firmware. If a redundant Onboard Administrator is present in the system, this
command flashes and validates its firmware before attempting to flash the Active Onboard
Administrator. Supported protocols are HTTP, FTP, and TFTP.
Update Image Sync initiates a firmware sync of the Active and Standby Onboard Administrators.
For USB protocol, see SHOW USBKEY.
•
Access level/Bay level:
OA administrator
| - | 2.8 | 2.8
| - | 2.2.2 | 2.2.2
| 1 | 2.7.4 | 2.7.4
| 2 | 2.7.4 | 2.7.4
| 3 | 2.7.4 | 2.7.4
| 4 | 2.7.4 | 2.7.4
| 5 | 2.7.4 | 2.7.4
| 6 | 2.7.4 | 2.7.4
Enclosure management commands 93