Preparing For Installation; Computer Site Safety Considerations; Floor Plan - HP Visualize J5000 - Workstation Manual

Site Preparation Guidelines

Preparing for Installation

Preparing for Installation
The following subsections contain information to help you properly plan
for the arrival and installation of your computer system.
NOTE If you purchased any upgrades (processor, I/O cards, etc.), install the new
component before proceeding. For more information on the upgrade
process, refer to the documentation included in the upgrade kit.

Computer Site Safety Considerations

The two major safety considerations for any computer site are fire safety
and emergency electrical power shut-off. When considering safety
precautions, emphasis should be placed on all matters concerning
personnel and equipment. The Hewlett-Packard CE, your insurance
carrier, and local building inspectors can advise you.
Fire Safety
When considering fire safety, the customer's insurance carrier should be
consulted for suggestions and recommendations as to the adequacy of
existing or proposed fire control systems. If a new site is to be built or an
existing structure modified, consult local building codes for fire
prevention and protection guidelines. Also consult with the
Hewlett-Packard CE and local fire inspector for additional information.
Emergency Electrical Power Shut-Off
The computer system power panel should include a shunt-trip wired to
an emergency shut-off switch and a thermostat device. This is for
deactivating all equipment power in case of an emergency or in case
room temperature exceeds safe operating conditions.

Floor Plan

Hewlett-Packard recommends that a floor plan be prepared showing the
overall location and arrangement of your computer system components.
Enough space should be provided for people to work efficiently on a daily
Chapter 2 15