Power Requirements - HP Visualize J5000 - Workstation Manual

Table 2-1
configuration weights of the J Class are listed in Appendix B.)
• Total weight of your computer system's peripherals. Your
Hewlett-Packard Sales Representative and CE can assist you in
determining peripheral weights.
• Total weight of furniture such as desks, chairs, tables, cabinets, etc.
(Refer to your floor plan and estimated furniture weights.)
• Total approximate weight of computer room personnel.
• Weight of moving equipment (such as forklifts, transport dollies, etc.).

Power Requirements

The most important installation considerations for the J Class are the
power requirements. Table 2-1 lists the power requirements for the
J5xxx and the J7xxx workstation.
Power Requirements
Input Power:
AC Frequency:
Maximum Power
Input:
Inrush Current:
Line Voltage
The AC line voltage available from a wall outlet is determined by the
local electrical power provider and the building power distribution
network. Voltages outside the operating range of the system can cause
system errors, or a system shutdown. If required, the Hewlett-Packard
CE along with your electrician can determine the line voltage and make
recommendations. Avoid the use of a line voltage conditioner.
Chapter 2
J5xxx
• 14.2 Amps RMS max
@ 100–120 VAC
• 7.1 Amps RMS max
@ 200–240 VAC
47–63 Hz
1,277 Watts
40 Amps @ 10 msec
Site Preparation Guidelines
Preparing for Installation
J7xxx
• 19.4 Amps RMS max
@ 100–120 VAC
• 9.7 Amps RMS max
@ 200–240 VAC
47–63 Hz
1,928 Watts
40 Amps @ 10 msec
17