HP Visualization Center sv6 Troubleshooting Manual page 29

Chapter 1
Master Warning Messages:
•
Graphics card mismatch in one or more Slaves.
Mixing heterogeneous graphics cards is not supported by sv6. If
you've added one, remove the non-standard card.
•
SLS/d Extension minor version mismatch in one or more
Slaves.
Update all systems to the most current version of graphics patches as
directed by the sv6 Installation/User's Guide.
•
OpenGL and/or cursor performance may not be optimal with
installed patches.
Update all systems to the most current version of graphics patches as
directed by the sv6 Installation/User's Guide.
•
Failed to initialize the Scalable Visualization Compositor.
Check all power and cable connections to Compositor.
•
Invalid Compositor Input/Output card combination.
Call Technical Support with Compositor hardware problem
•
One or more Compositor cards missing FPGA programming.
Call Technical Support with Compositor hardware problem
•
One or more Compositor cards may have corrupt FPGA
programming.
Call Technical Support with Compositor hardware problem.
•
Bad data transfer from Compositor Controller card.
Call Technical Support with Compositor hardware problem.
•
Bad data transfer to Input/Output card
Call Technical Support with Compositor hardware problem.
•
Video signal integrity problem detected.
Call Technical Support.
•
Compositor reset detected.
Reboot master machine.
•
Compositor Output Card is in the wrong slot
troubleshooting your hp visualization center sv6
.
.
troubleshooting tree
29