Wide Field Displays - HP Visualization Center sv6 Troubleshooting Manual

troubleshooting your hp visualization center sv6
troubleshooting the hp workstation j6000
5. Use your standard support process for contacting Hewlett-Packard
Customer Support as defined by your HP Support Contract. Define
the symptoms and troubleshooting information to expedite resolution
of the problem.
6. If 3D SLS/d is suspected, your HP Support contact will instruct you to
check your file configurations, log files, or run swlist to gather other
HP diagnostics information.
wide field displays
Here are general procedures for HP-compatible Wide Field Display
options for multi-channel configurations. Follow the installation
procedures recommended by the vendor of your Wide Field Display.
Common possible problems encountered with projectors and other Wide
Field Display devices:
• System console lock-up.
• No image from projectors.
• Screen geometry misaligned or incorrect.
1. System console lock-up.
Control of mouse or keyboard?
If Yes - perform a safe shutdown, cycle power on the Compositor
and reboot the master system.
If No - cycle power on the Compositor, then use reset button or
power-cycle the master system to reboot.
If failure persists, contact the display vendor.
2. No image from display device.
Are all devices powered on?
If Yes - proceed.
If No - power up.
Are they in a 'sleep' mode?
If Yes - take out of sleep mode and proceed.
If No - proceed.
Do you get output if you attach a standard monitor?
If Yes -contact display vendor.
If No - proceed to the "Display Looks Incorrect" section of the
"Troubleshooting Tree"
3. Screen geometry misaligned or discolored.
14 Chapter 1