Appendix A: Color Measurement Instruments; Using The X-Rite Dtp41 Spectrophotometer; Setting Up The Dtp41 - EFI KM-C1530 Color Manual

A
A-1 Color Measurement Instruments
Appendix A:
Color
Measurement
Instruments
This appendix explains how to set up and calibrate the following color measurement
instruments, available as separately purchased options:
• X-Rite DTP41 automatic scanning spectrophotometer
• X-Rite DTP32 automatic scanning densitometer

Using the X-Rite DTP41 spectrophotometer

ColorWise Pro Tools Calibrator supports the X-Rite DTP41 spectrophotometer, a
device that measures density and color data. The DTP41 communicates directly with
the Calibrator application in ColorWise Pro Tools, sending measurements to the
Fiery X3e automatically.

Setting up the DTP41

Before you calibrate the Fiery X3e, you must connect, configure, and calibrate the
spectrophotometer to prepare for measuring the printed patches. For additional
information about setting up and using the DTP41, see the documentation included
with the instrument.