EFI KM-C1530 Color Manual page 70

3
3-10 ColorWise Pro Tools
While you cannot delete a preset profile, you can use the name of a preset
N :
OTE
profile name for your edited profile when you select the "Appear in Driver as" option.
This replaces the preset profile with your own profile.
When you choose Profile Settings for an output profile, the Use Calibration Set
options also appear. You must calibrate the Fiery X3e with this calibration set before
this option has any effect. If you have never measured for this calibration set, default
measurements will be used. For more information about calibration sets, see page 2-2.
In Profile Settings, you can also change profile descriptions for all non-locked profiles.
4. Click OK.
DIC-new will appear
in driver as
Simulation-1