Using The Efi Densitometer; Setting Up The - EFI KM-C1530 Color Manual

2
2-16 Color Calibration
9. When the Status field indicates that the measurements were read successfully,
10. Click OK in the Measure dialog box.
11. Click Apply in the Calibrator window to implement the new calibration set.
12. Click OK in the Information dialog box.
Indicator light
Measure button
Sample aperture
(underneath)
click Accept.
This completes the calibration process.
Using the EFI Densitometer ED-100
The EFI Densitometer ED-100 is a hand-held instrument that measures the density of
printed ink and toner. Like the DTP32, the ED-100 is a reflection
you can use to calibrate the Fiery X3e.
The ED-100 is available as a separately purchased option.
Setting up the ED-100
To use the ED-100 for calibration purposes, you must first set it up for use with your
computer. For complete instructions on setting up the ED-100, see the documentation
that is included with the instrument.
The following illustration shows the components of the ED-100.
densitometer that