EFI KM-C1530 Color Manual page 63

3
3-3 Profile Manager
In addition, one or more output profiles are provided with the Fiery X3e.
•
Fiery 31C-M v1F
Use this profile for ordinary printing.
•
Fiery 31C-M HiGCR v1F
in the reproduction of gray or grayish tones. Use this profile to print images with
subtle grayish tones. However, you may get undesirable results caused by the
interference of halftone dots when you print images such as graphs that have black
lines on a grayish background. In this case, use the Fiery 31C-M v1F profile.
•
Fiery 31C-M 100% GCR v1F
saving toner because the gray components of C, M, and Y are reduced and replaced
by pure K (black). However, you may get undesirable results caused by the
interference of halftone dots, or you may find the black portions to be unnaturally
glossy. In this case, use the Fiery 31C-M v1F profile.
For more information about output profiles, see
—profile that describes the copier and is resident on the Fiery X3e.
—profile that describes the copier, but is superior especially
—profile that describes the copier, but has the benefit of
page 1-11.