EFI KM-C1530 Color Manual page 74

3
3-14 ColorWise Pro Tools
5. Select the colors you want to edit by turning colors off and on.
The Eye icon to the left of each color indicates whether that color is visible on the
graph and will be affected by changes to the curves, brightness, and dot gain controls.
You can view and edit all four colors (cyan, magenta, yellow, and black) at once, or in
any combination. Working with only one or two colors at a time allows you to
fine-tune your adjustments. To turn off a color, click its Eye icon. In the following
example, cyan and magenta are visible and can be edited.
6. To adjust the dot gain value for simulating press output, click Dot Gain.
Choose either the North American or European standard. Use the sliders to adjust to
the desired Dot Gain:
• The range of values for North American at 50% input are from 0% to 50% gain
on output.
• The range of values for European at 40% input are from 0% to 59% gain on output;
the range of values for European at 80% input are from 0% to 20% gain on output.