Color Editor; Editing Profiles - EFI KM-C1530 Color Manual

3

3-11 Color Editor

Simulation-1 now appears under the "Appear in Driver as" column for DIC-new.
Choosing Simulation-1 from the CMYK Simulation option of the printer driver
applies the DIC-new simulation to the print job.
If you do not define a custom simulation profile, your job will print with CMYK
Simulation Profile set to None. If you do not define a custom RGB Source or Output
profile, the default profile is used.
Color Editor
Color Editor allows you to customize simulation and output profiles. Access Color
Editor directly by clicking its icon in the ColorWise Pro Tools main window, or
indirectly, through the Profile Manager.
Editing profiles
Color Editor allows you to create custom profiles by editing existing simulation or
output profiles and saving the changes as a new profile. Use Color Editor to fine-tune a
profile on your Fiery X3e to meet your exact specifications.
You cannot edit source profiles; only simulation and output profiles can
N :
OTE
be customized.
Color Editor has two Edit Modes for editing output profiles.
• —Edit output profiles and save customized versions of them.
Custom
• —View the calibration target, which is one component of the output
% Density
profile. You cannot make changes to the calibration target in this window, but you
can import a new target (see page 2-2).