Pure Black Text/Graphics - EFI KM-C1530 Color Manual

Ver 2.0
Hide thumbs Also See for KM-C1530:
Table of Contents

Advertisement

1
1-12 Fiery X3e Color Management

Pure Black Text/Graphics

The Pure Black Text/Graphics option affects the printout for black text and
graphics
on a page. Under most circumstances, leave this option set to On. When
Pure Black Text/Graphics is on, black colors generated by applications are printed
using 100 percent black-only toner (for example, RGB = 0, 0, 0;
CMYK = 0%, 0%, 0%, 100%; or K = 100%). This means the black text and line art
will not exhibit halftone
toner used. In addition, this setting eliminates blasting. This option is automatically
set to On when the Black Overprint option is set to On.
For some jobs, it is preferable to clear this option, for example, if the page includes
gradient
fills that use black. The following table describes the behavior of the Pure
Black Text/Graphics option with black data defined in different color spaces.
Use the Pure Black Text/Graphics option only when printing composites, not
N
:
OTE
when printing separations.
Input
black color
RGB
CMYK
Spot
artifacts
and will not be misregistered, since there is only one
Pure Black Text/Graphics
On
Prints 100% black
With the default profile, prints a rich black using
all toners.
Prints only with black toner, because CMYK
simulations preserve the black channel. The actual
amount of toner used depends on the current
simulation and the calibration state of the copier.
Prints only with black toner, because spot color
simulations preserve the black channel. The actual
amount of toner used depends on the current
simulation and the calibration state of the copier.
vector
Off

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fiery x3e

Table of Contents