Heat Sink - HP 4410t - Mobile Thin Client Maintenance And Service Manual

Heat sink

✎
The heat sink spare part kit includes replacement thermal material.
Description
Heat sink
Before removing the heat sink, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover (see
b. Keyboard (see
c. Optical drive (see
d. Speakers (see
e. Palm rest (see
f. Solid-state module (see
g. Top cover (see
Maintenance and Service Guide
"Battery" on page
"Switch cover" on page
"Keyboard" on page 4-9)
"Optical drive" on page
"Speakers" on page 4-15)
"Palm rest" on page 4-16)
"Solid-state module" on page
"Top cover" on page 4-22)
4-7).
4-8)
4-13)
4-20)
Removal and replacement procedures
Spare part
number
535859-001
4–29