Switch Cover - HP 4410t - Mobile Thin Client Maintenance And Service Manual
Mobile thin client
Hide thumbs
Also See for 4410t - Mobile Thin Client:
- Administrator's reference manual (104 pages) ,
- Printing manual (18 pages) ,
- Manual (8 pages)
Table of Contents
Advertisement
Removal and replacement procedures
Switch cover
Description
Switch cover
Before removing the switch cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the switch cover:
1. Remove the following screws:
❏
Two Phillips PM2.5×5.0 screws 1
❏
Two Phillips PM2.5×3.0 broadhead screws 2
❏
Two Phillips PM2.5×3.0 screws 3
4–8
"Battery" on page
4-7).
Spare part
number
535860-001
Maintenance and Service Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the 4410t - Mobile Thin Client and is the answer not in the manual?
Questions and answers