Removal and replacement procedures
RTC battery
✎
The RTC battery is included in the Plastics Kit, spare part number 535780-001.
Before removing the RTC battery, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover (see
b. Keyboard (see
c. Optical drive (see
d. Speakers (see
e. Palm rest (see
f. Solid-state module (see
g. Top cover (see
Remove the RTC battery:
»
Remove the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery.
4–26
"Battery" on page
"Switch cover" on page
"Keyboard" on page
4-9)
"Optical drive" on page
"Speakers" on page
4-15)
"Palm rest" on page
4-16)
"Solid-state module" on page
"Top cover" on page
4-22)
4-7).
4-8)
4-13)
4-20)
Maintenance and Service Guide