Switch cover
Description
Switch cover
Before removing the switch cover, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the switch cover:
1.
Position the computer upside down with the rear toward you.
2.
Remove the four PM2.5×3.0 screws in the battery bay.
3.
Turn the computer right-side up, and open the computer as far as possible.
Battery on page
36).
Spare part number
599567-001
Component replacement procedures
37