Spectra Logic Spectra 64K Supplementary Manual page 5

Entry/exit port slider

Hide thumbs Also See for Spectra 64K:

Table of Contents

Materials Required

You will need an E/E port slider assembly from Spectra Logic or an authorized reseller:

• E/E port slider assembly, P.N. 90919043 (top) or

• E/E port slider assembly, P.N. 90910044 (bottom)

You will also need the following tools:

• A #1 Phillips screwdriver

• A #2 Phillips screwdriver

• A 3/32-inch hex wrench

• A 2.5-mm hex wrench

• A small flat head screwdriver

• A large flat head screwdriver

• A flashlight

• The library door key

• The key to the rear door of the library (Spectra 64K libraries only)

Entry/Exit Port Slider Replacement Guide

Table of Contents

Need help?

Do you have a question about the Spectra 64K and is the answer not in the manual?

Spectra 12k library Spectra 64klibrary Spectra 12k