Using A Cartridge-Type Cleaner; Figure 60. Cartridge Cleaner; Figure 61. Rubbing The Ferrule Tip On The Cleaning Surface - Allied Telesis AT-EN646 Installation Manual

Appendix B: Cleaning Fiber Optic Connectors

Using a Cartridge-Type Cleaner

92
Fiber optic cartridge cleaners are available from many vendors and are
typically called "cartridge cleaners," as shown in Figure 60.
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a fiber optic connector using a cartridge cleaner, perform the
following procedure.
7. With one hand, hold the cartridge cleaner and push the lever on the
cleaning cartridge in the direction of the arrow to expose the cleaning
surface, as shown in Figure 61.
8. Place the ferrule tip on the exposed cleaning surface and rub the
ferrule in a downward direction, as shown in Figure 61.

Figure 61. Rubbing the Ferrule Tip on the Cleaning Surface

Figure 60. Cartridge Cleaner