Figure 32. Securing The Gateway To The Mounting Post; Figure 33. Mounting The Gateway - Allied Telesis AT-EN646 Installation Manual

Section I: Outdoor Installation
AT-iMG646xx Series Intelligent Multiservice Gateway and AT-EN646 Enclosure Installation Guide
5. Secure the gateway to the mounting post with the Kepnut from the
accessory kit, as shown in Figure 32, hand tightening the lock nut until
it is snug.

Figure 32. Securing the Gateway to the Mounting Post

Note
Do not tighten the nut until after you install the other gateway
mounting screws.
6. Mount the gateway in the enclosure with four self-tapping pan head
Phillips screws from the accessory kit, as shown in Figure 33, starting
with the upper right corner.

Figure 33. Mounting the Gateway

857
858
57