Verifying Single-Point Configuration For Mgcp Gateways - Cisco VGD-1T3 Software Configuration Manual

Using Cisco Unified Communications Manager to Configure MGCP Gateway Support
SUMMARY STEPS
1.
2.
3.
4.
5.
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
ccm-manager config server {ip-address |
name}
Example:
Router(config)# ccm-manager config server
10.10.1.10
Step 4
ccm-manager config
Example:
Router(config)# ccm-manager config
Step 5
exit
Example:
Router(config)# exit

Verifying Single-Point Configuration for MGCP Gateways

Use the show commands described in this section to verify the single-point configuration for MGCP
gateways.
SUMMARY STEPS
1.
2.
DETAILED STEPS
show running-config
Step 1
enable
configure terminal
ccm-manager config server {ip-address | name}
ccm-manager config
exit
show running-config
show ccm-manager config-download
Purpose
Enables privileged EXEC mode.
• Enter your password when prompted.
Enters global configuration mode.
Specifies the TFTP server by IP address or logical name.
Enables the gateway to be configured by a centralized XML
file and triggers the gateway to download a new configuration.
Exits global configuration mode.
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Configuring MGCP Gateway Support
135