Cisco VGD-1T3 Software Configuration Manual page 201

Using the ROM Monitor
CPU Context:
d0 - 0x00000028
d1 - 0x00000007
d2 - 0x00000007
d3 - 0x00000000
d4 - 0x00000000
d5 - 0x02003e8a
d6 - 0x00000000
d7 - 0x00000001
pc - 0x02004adc
• cookie—Displays the contents of the cookie PROM in hexadecimal format.
For example:
rommon 1 > cookie
cookie:
00 01 01 31 03 15 03 20 00 14 33 01 30 11 4a 41
42 30 33 35 31 30 37 38 32 00 00 00 00 00 13 63
0c 1d 00 00 00 00 11 11 22 22 33 33 44 44 55 55
66 66 77 77 88 88 99 99 00 00 11 11 22 22 33 33
ff 00 30 96 f8 00 7a ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
dev—Lists boot device identifications on the gateway.
•
For example:
rommon 10 > dev
Devices in device table:
flash:
• dir devid—Lists the files on the named device.
For example:
rommon 11 > dir flash:
File size
ethertype [fe | ge]—The Cisco VGD 1T3 voice gateway Ethernet ports are Gigabit Ethernet ports
•
(labeled GE0 and GE1 on the chassis). The Cisco IOS firmware and software is designed so that
configurations for Fast Ethernet will work on the Cisco VGD 1T3 voice gateways without requiring
any modification by the user.
If the Cisco IOS commands, write or copy running-config startup-config have been used to save
the configuration to NVRAM, then all references to Ethernet interfaces will now be GigabitEther,
and the IOS commands, write terminal and show running configuration will always show
GigabitEther.
If you must have FastEther available as a searchable word for any scripts you are using, you can use
the ROMMON command, ethertype fe to change GigabitEther to FastEther. Once you enter
ethertype fe, the IOS image will only recognize FastEther. It will not recognize GigabitEther.
For example:
rommon 6 > ethertype fe
a0 - 0x0ff00420
a1 - 0x0ff00000
a2 - 0x02004088
a3 - 0x020039e6
a4 - 0x02002a70
a5 - 0x02003f17
a6 - 0x02003938
a7 - 0x0200392c
vbr - 0x02000000
id name
flash: flash
flash
Checksum
9474676 bytes (0x909274)
File name
0x54322421 c5350-js-mz.Jan6
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
ROM Monitor Commands
191