Cisco VGD-1T3 Software Configuration Manual page 175

Using Cisco Unified Communications Manager to Configure Transcoding and Media Termination Point
voice-card 2
dspfarm
!
no aaa new-model
ip subnet-zero
!
!
ip domain name cisco.com
ip host sample 10.10.10.5
ip host myhost 10.4.175.2
mpls ldp logging neighbor-changes
no ftp-server write-enable
no scripting tcl init
no scripting tcl encdir
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.4.175.2
ccm-manager config
!
!
controller T1 2/0:1
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-fgb
!
controller T1 2/0:2
framing sf
linecode ami
!
!
!
interface FastEthernet0/0
ip address 10.4.175.14 255.255.0.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI1/0
no ip address
!
ip default-gateway 10.4.0.1
ip classless
ip route 0.0.0.0 255.255.0.0 FastEthernet0/0
ip route 223.255.254.254 255.255.255.255 FastEthernet0/0
!
ip http server
!
!
voice-port 1/0:0
!
voice-port 1/0:1
!
voice-port 1/1:0
Configuration Examples for Transcoding and MTP
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
165