Cisco VGD-1T3 Software Configuration Manual page 153

Using Cisco Unified Communications Manager to Configure MGCP Gateway Support
Total Allocated ISDN CCBs = 0
Step 2 show ccm-manager
Use the show ccm-manager command to view the registration status with Cisco Unified
Communications Manager, for example:
Router# show ccm-manager
MGCP Domain Name: AV-2620-4
Priority
============================================================
Primary
First Backup
Second Backup
Current active Call Manager:
Backhaul/Redundant link port:
Failover Interval:
Keepalive Interval:
Last keepalive sent:
Last MGCP traffic time:
Last failover time:
Switchback mode:
MGCP Fallback mode:
Last MGCP Fallback start time:
Last MGCP Fallback end time:
PRI Backhaul Link info:
Link Protocol:
Remote Port Number:
Remote IP Address:
Current Link State:
Statistics:
PRI Ports being backhauled:
Configuration Auto-Download Information
=======================================
Current version-id: {1645327B-F59A-4417-8E01-7312C61216AE}
Last config-downloaded:00:00:49
Current state: Waiting for commands
Configuration Download statistics:
Last config download command: New Registration
Configuration Error History:
FAX mode: cisco
Step 3 show ccm-manager backhaul
Use the show ccm-manager backhaul command to verify the PRI backhaul link information, for
example:
Router# show ccm-manager backhaul
Status
Registered
Backup Ready
None
TCP
2428
10.16.240.124
OPEN
Packets recvd: 32
Recv failures: 0
Packets xmitted: 32
Xmit failures: 0
Slot 1, port 0
Download Attempted
Download Successful
Download Failed
Configuration Attempted
Configuration Successful
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
Host
10.16.240.124
10.16.240.128
10.16.240.124
2428
30 seconds
15 seconds
00:45:31 (elapsed time: 00:00:04)
00:45:31 (elapsed time: 00:00:04)
None
Graceful
Not Selected
00:00:00
00:00:00
: 6
: 6
: 0
: 1
: 1
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Configuring MGCP Gateway Support
143