Cisco VGD-1T3 Software Configuration Manual page 100

Using Online Insertion and Removal to Replace the High-Density Packet VFC
Command or Action
Step 5
clear voice dsp {channels | error}
[slot[/dsp][/channel]] [slot[/dsp][/channel]]
Step 6 Remove the High-Density Packet VFC from the slot.
Step 7 Insert the High-Density Packet VFC in the slot.
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, the Cisco logo, DCE, and Welcome to the
Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar,
Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified
Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration
Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient,
IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone,
MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect,
ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and
the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply
a partnership relationship between Cisco and any other company. (0807R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and
coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
90
Configuring and Managing the High-Density Packet Voice Feature Card
Purpose
(Optional) Forces a busyout of all calls on a channel. Use
this command to forcefully busyout any remaining calls on
specific channels, slots, or DSPs.
• channels—Clears DSP calls on a specific channel or a
range of channels.
errors—Clears DSP error statistics.
•
/slot—(Optional) Specifies either a single slot or the
•
first slot in a range. To specify a range of slots, you can
enter a second slot in the syntax of this argument. The
second slot specifies the end of the range. All slots in
the range are affected by the command.
• /dsp—(Optional) Specifies either a single DSP on the
slot or the first DSP in a range. To specify a range of
DSPs, you can enter a second DSP in the syntax of this
argument. The second DSP specifies the end of the
range. All DSPs in the range are affected by the
command.
/channel—(Optional) Specifies either a single channel
•
on the DSP or the first channel in a range. To specify a
range of channels, you can enter a second channel in the
syntax of this argument. The second channel specifies
the end of the range. All channels in the range are
affected by the command.
The High-Density Packet VFC is physically removed from
the chassis.
When the High-Density Packet VFC is reinserted in the
chassis, the card is automatically detected and activated.