Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
Preparation

Connecting a Power Source

✤ There are two types of power source that can be connected to
your Camcorder.
- The AC Power adapter and AC Cord: used for indoor
recording.
- The Battery pack: used for outdoor recording.

To use the AC Power Adapter and DC Cable

1. Connect the AC Cord to the AC Power
adapter.
2. Connect the AC Cord to a wall socket.
[ Notes ]
I
You must use an AA-E8 TYPE AC
Power adapter.
I
The plug and wall socket type may differ according to your resident
country.
3. Connect the DC cable to the DC jack of the
Camcorder.
4. Set the Camcorder to each mode by holding
down the tab on the Power switch and turning
it to the REC, PLAY,
mode.
22 22
Power Switch
<REC Mode>
(CAMERA) or OFF
<OFF Mode>
✤
I
I
<PLAY Mode>
<CAMERA Mode>
REC
PLAY CAMERA-
OFF