Digital Still Camera Mode : Functions; Numbering Stored Pictures - Samsung VP-D6550 Owner's Instruction Book

ENGLISH

Digital Still Camera Mode : Functions

Numbering Stored Pictures

✤ File numbers are given to images in the order they were recorded
when they are stored on the Memory Card.
✤ You can reset the numbering back to DCAM0001 at any time by
setting the FILE to RESET.
1. Set the Power switch to
2. Press the MENU button.
3. Move the Joystick to the left or right to select
(SETUP).
I
The SETUP menu list will appear.
4. Move the Joystick up or down to select FILE, then
move the Joystick to the right.
I
The RESET and SERIES options are
displayed.
- RESET: When there are no files stored on
the Memory card, the file numbering starts
from 0001.
- SERIES: When there are existing files,
the image will be named as the number in
the sequence.
5. Select the desired option by moving the Joystick up or down.
6. Press the Joystick(OK) to apply your selection.
I
The selected option is applied.
7. Press the MENU button to exit the menu screen.
[ Notes ]
I
The file numbers start from DCAM0001 at the time of purchase.
I
Moving images are stored in the folder DCIM.
I
File numbering for a Memory Card that contains image files from
another device, will begin after the largest number.
I
A previously formatted Memory Card using a personal computer
might require reformatting.
I
DCF ERROR message is displayed when it exceeds the limit. If
this occurs, delete files or format your Memory Card after moving
your data stored in the Memory Card to a PC.
86 86
1
(CAMERA).
4
SETUP
FILE
LANGUAGE
FORMAT
LCD
USB
✤
✤
MENU
I
FILE
I
2592
BACK: SET:OK
RESET
SERIES
I
MENU
I
I
I
I
I DCF ERROR