Taking Multiple Images Using Auto Exposure Bracketing - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
Digital Still Camera Mode : Advanced Techniques

Taking Multiple Images Using Auto Exposure Bracketing

✤ Auto Exposure Bracketing works only in
✤ From time to time, determining the best exposure setting for a
image may be difficult and you may not have time to check the
results and try again. Auto Exposure Bracketing allows the user to
vary exposure compensation settings automatically over a series of
photos, bracketing a selected exposure compensation setting.
✤ Auto Exposure Bracketing takes 3 continuous shots with the
following exposure compensations:
-5EV (negative), 0EV (standard), +5EV (positive)
1. Set the Power switch to
2. Set the Mode Dial to
3. Press the MENU button.
4. Move the Joystick to the left or right to select
(SHOOTING).
I
The available options are listed.
5. Select an AEB by moving the Joystick up or down,
then press the Joystick(OK) or MENU button.
I
The selected option is applied.
6. Frame your subject and press the PHOTO button to
start bracketing.
I
3 continuous images using exposure bracketing
are taken.
[ Notes ]
I
The Built-In Flash is disabled for Auto Exposure
Bracketing and Continuous Shots.
I
The Digital Zoom is not available for Auto Exposure
Bracketing and Continuous Shots.
I
If there is not enough free space to save the 3
images, the Auto Exposure Bracketing will not work.
124 124
(Programme) mode.
1
(CAMERA).
(Programme).
2
5
œ
✤
✤
✤
√
NOR
SHOOTING
I
SINGLE
CONTINUOUS
AEB
AEB
I
I
MENU
I
MENU
I
PHOTO
I
AEB