Connecting The Power Source; To Use The Ac Power Adapter - Samsung Hi8 SCL700 Owner's Instruction Book

LENGLISHI
Preparing
Connecting the Power Source
4" There are b.'_o w ays to connect powersource
Usingthe AC PowerAdapter used for indoor recording
Using the Battery Pack used for outdoor recording
To use the AC Power Adapter
1 Connect the AC Power Adapter [o the AC cord
2 Connect the AC cord to a wall socket
Note The plug and ;,.,all socket type may be d_fferent depending on regional conditions
3 Connect the other end of the DC cable to DC jack of the ca['ncorder
4 To set the camcorder to the CAMERA mode
a Hold down the tab of [he power switch and push the switch to CAMERA mode
b Make sure that the Lens Cap is open
c Open [he LCD monitor and make sure that the image appears _n the LCD monitor
The LCD monitor is turned on automatically when it's opened more than 30 degrees
Note If the adapter is used next to a TV or the camcorder
_tmay cause the TV or camcorder to emit noise
,_1ove the adapter away from the TV camcorder or the antenna cable