Battery Level Display; Turning The Osd (On Screen Display) On/Off - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
Preparation

Battery Level Display

✤ The battery level display indicates the amount of
power remaining in the Battery pack.
a. Fully charged
b. 20~40% used
c. 40~80% used
d. 80~95% used
e. Completely used (Blinking)
(The Camcorder will turn off soon, change the battery
as soon as possible) Tips for battery Identification
[ Notes ]
I
Please refer to the Table on page 24 for approximate
continuous recording time.
I The recording time is affected by temperature and
environmental conditions.
I The recording time shortens dramatically in a cold
environment. The continuous recording times in the
operating instructions are measured using a fully
charged Battery pack at 77 °F (25 °C). As the
environmental temperature and conditions vary.
The remaining battery time may differ from
the approximate continuous recording times given in
the instructions.

Turning the OSD (On Screen Display) On/Off

I Turning OSD on/off
Press the DISPLAY button on the left side control panel.
- Each press of the button toggles the OSD function on and off.
- When you turn the OSD off,
In REC Mode: The STBY, REC modes are always displayed on the
OSD, even when the OSD is turned off and the key input is
displayed for 3 seconds then turned off.
In PLAY Mode: When you press any function button, the function is
displayed on the OSD for 3 seconds before it turns off.
I Turning the Date/Time on/off
To turn the Date/Time on or off, access the menu and change the
Date/Time mode. (see page 35)
(Blinking)
<Camcorder Mode>
(Blinking)
<Camera Mode>
I
REC
PLAY
I Date/Time
✤
I
I
I
DISPLAY
25 25