Av In/Out (Vp-D6550I Only) - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
The Camcorder : Playback

AV In/Out (VP-D6550i only)

✤ AV In/Out function works only in PLAY mode.
✤ AV In/Out setting enables you to record signal from external sources
and display it on LCD screen. Also, you can direct your video or image
to external devices to record or play back.
1. Connect the Camcorder to your VCR or TV with the
Multi-AV cable. (See pages 70~71)
2. Set the Power switch to PLAY.
3. Turn on the VCR or TV.
4. Insert the blank tape with protection tab closed into the
Camcorder.
I
If you want to record from a connected VCR, insert a
recorded VHS tape into the VCR.
5. Press the MENU button.
I
The menu list will appear.
6. Move the Joystick up or down to select Record,
then press the Joystick(OK).
7. Move the Joystick up or down to select AV In/Out,
then press the Joystick(OK).
8. Move the Joystick up or down to select Out, AV In or
S-Video In, then press the Joystick(OK).
I
If you want to see the Camcorder picture with a TV,
set AV In/Out menu to Out.
9. To exit, press the MENU button.
10. Press the Start/Stop button to set the Camcorder
to REC PAUSE mode.
I
PAUSE appears on the LCD screen.
11. Select the TV programme or play back the VHS tape.
12. Press the Start/Stop button to start recording.
I
If you want to temporarily pause a recording, press
the Start/Stop button.
13. To stop recording, press the I (STOP) button.
[ Note ]
When you record the images being played back on an analog VCR, if they
are not being played back at normal speed, (for example, more than double
speed or slow playback), only a gray image appears on the Camcorder.
74 74
✤
✤
1
6
PLAY Mode
√Record
√SP
Rec Mode
√12Bit
Audio Mode
√Off
Wind Cut
√Out
AV In/Out
Move Select Exit
OK MENU
8
PLAY Mode
√Record
Rec Mode
Audio Mode
Wind Cut
AV In/Out
Out
AV In
S-Video In
Move Select Exit
OK MENU
I
I
I
I
I
I