Connecting A Power Source; To Use The Ac Power Adapter - Samsung 8 VP-W60 Owner's Instruction Book

ENGLISH
Preparing

Connecting a Power Source

There are two types of power source available.
- Using the AC Power Adapter : used for indoor recording.
- Using the Battery Pack: used for mobile recording.

To use the AC Power Adapter

1. Connect the AC Power Adapter to a AC cord.
2. Connect the AC cord to a wall socket.
Note: The plug and wall socket type can be different
according to the regional conditions.
3. Connect the other end of the DC cable to DC jack of
the camcorder.
4. To set the camcorder to CAMERA mode.
a. Hold down the tab of the power switch and push
the switch to CAMERA mode.
b. Make sure that the Lens Cap is opened.
c. Make sure that the image appears in the Viewfinder.
Note: If the adapter is used next to the TV or the camcorder, it may cause the TV or
camcorder to emit noise. Move the adapter away from the TV, camcorder or
the antenna cable.
18
1
2
3
4-a
CAMERA