Lithium Battery Installation; Battery Installation For The Internal Clock; Battery Installation For The Remote Control - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
Preparation

Lithium Battery Installation

Battery Installation for the Internal Clock

✤ The Lithium battery maintains the clock function and preset
contents of the memory; even if the Battery pack or AC Power
adapter is removed.
✤ The Lithium battery for the Camcorder lasts about 6 months under
normal operation from the time of installation.
✤ When the Lithium battery becomes weak or dead,
the date/time indicator will display 00:00 1.JAN.2005
when you set the Date/Time to on. When this occurs,
replace the Lithium battery with type CR2025.
1. Remove the Lithium-ion battery from the rear of the
Camcorder.
2. Open the Lithium battery cover on the rear of the
Camcorder.
3. Position the Lithium battery in the Lithium battery
holder, with the positive (
4. Close the Lithium battery cover.

Battery Installation for the Remote Control

✤ You need to insert or replace the Lithium battery
when:
- You purchase the Camcorder.
- The remote control doesn't work.
✤ Position the Lithium battery in the Lithium battery
holder, with the positive (
✤ Be careful not to reverse the polarity of the battery.
[ Note ]
The Lithium battery must be inserted in the correct
direction.
Warning: Keep the Lithium battery out of the reach of the
children. Should any battery be swallowed, consult a
doctor immediately.
) terminal face up.
) terminal face up.
✤
✤
✤
00:00 1.JAN.2005
✤
✤
✤
21 21