ENGLISH
The Camcorder : Playback
Controlling Sound from the Speaker
✤ The Speaker works only in PLAY mode.
✤ When you use the LCD screen for playback, you can hear
recorded sound from the built-in Speaker.
-
Take the following steps to lower the volume or mute the sound
while playing a tape on the Camcorder.
1. Set the Power switch to PLAY.
2. Press the √/» (PLAY/STILL) button to play the tape.
3. When you hear sounds once the tape is in play, use
the Quick menu selector to adjust the volume.
A volume level display will appear on the LCD
I
screen.
Levels may be adjusted from anywhere between
00 to 19 and you will not hear any sound when
the volume level is set on 00.
If you close the LCD screen while playing, you
I
will not hear sound from the speaker.
[ Notes ]
When the Multi-AV cable is connected to the
I
Camcorder, you cannot hear sound from the Built-In
Speaker and cannot adjust the volume.
I
The sound will return when you remove the
connected Multi-AV cable from the jack of your
Camcorder.
✤
✤
2
3
√
0:00:10:00
SP
I
60min
I
[05]
...
†
√/»
I
I
69
69