Samsung VP-D6550 Owner's Instruction Book page 78

ENGLISH
IEEE 1394 Data Transfer
System Requirements
I
CPU: faster Intel ® Pentium III™ 450MHz compatible.
I
Operating system: Windows
I
Main memory: more than 64 MB RAM
I
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV Connection Cable (VP-D6550i only)
1. Set the Power switch to PLAY.
2. Connect the DV cable (not supplied) from
the DV jack of the Camcorder to the DV
jack of the other DV device.
I
Make sure that
the LCD screen.
3. Press the Start/Stop button to begin
REC PAUSE mode.
I
PAUSE is displayed on the LCD
screen.
4. Start playback on the other DV device
while you monitor the picture.
5. Press the Start/Stop button to start
recording.
I
If you want to pause recording momentarily, press the
Start/Stop button again.
6. To stop recording, press the I (STOP) button.
[ Notes ]
I
VP-D6550i has DV in/out enabling the camcorder to act as a
player or recorder of data transferred via the DV jack.
VP-D6550 has DV out only, enabling the camcorder to act as a
player of data transferred via the DV jack.
I
When using this Camcorder as a recorder, the pictures that appear
on a monitor may seem uneven, however recorded pictures will not
be affected.
I
Operation is not guaranteed for all the recommended computer
environments mentioned above.
I
While transmitting data from the Camcorder to PC at strong
electric field and strong magnetic field, VIDEO signal or AUDIO
signal may transmit with noise.
78 78
® 98SE, ME, XP, Mac OS (9.1~10.2)
is displayed on
I
I
I
I
I
I
I
I
I
I
I
I