Using The Lithium Ion Battery Pack; Charging The Lithium Ion Battery Pack - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
Preparation

Using the Lithium Ion Battery Pack

✤ The amount of continuous recording time available depends on
- The type and capacity of the Battery pack you are using.
- How often the zoom function is used.
It is recommended that you have several batteries available.

Charging the Lithium Ion Battery Pack

1. Attach the Battery pack to the Camcorder.
2. Connect the AC Cord to the AC Power adapter
and connect the AC Cord to a wall socket.
3. Connect the DC cable to the DC jack on the
Camcorder.
4. Turn the Power switch to OFF, and the charging
indicator will start to flash, showing
that the battery is charging.
Blinking time
Once per second Less than 50%
Twice per second 50% ~ 75%
Three times per second 75% ~ 90%
Blinking stops and stays on 90% ~ 100%
On for a second and Error - Reset the Battery
off for a second pack and the DC cable
5. When the battery is fully charged, disconnect the Battery
pack and the AC Power adapter from the Camcorder.
Even with the Power switched OFF, the Battery pack will still discharge.
[ Notes ]
I
The Battery pack may be charged a little at the time of purchase.
I
To prevent reduction in the life and capacity of the Battery pack, always
remove it from the Camcorder after it is fully charged.
I
The amount of continuous recording time available depends on:
- The type and capacity of the Battery pack you are using.
- How often the zoom is used.
- Type of use (Camcorder/Camera/With LCD screen etc.).
- Ambient temperature.
It is recommended to have additional battery packs available.
I
Even when the Power switched to OFF, the Battery pack will still discharge if
it is left attached to the device.
Power Switch
Charging rate
4
✤
<Charging Indicator>
I
I
I
I
23 23