Setting The Clock - Samsung VP-D6550 Owner's Instruction Book

ENGLISH
The Camcorder : System Menu Setting

Setting the Clock

✤ Clock setup works in both REC and PLAY modes.
✤ The Date/Time is automatically recorded onto a tape.
Before recording, please set the Date/Time.
1. Set the Power switch to REC or PLAY.
2. Press the MENU button.
I
The menu list will appear.
3. Move the Joystick up or down to select System,
then press the Joystick(OK).
4. Move the Joystick up or down to select Clock Set,
then press the Joystick(OK).
I
The year will highlight first.
5. Move the Joystick up or down to set current
Year, then press the Joystick(OK).
I
The month will be highlighted.
6. You can set the month, day, hour and minute
following the same procedure for setting the year.
7. Press the Joystick(OK) after setting the minutes.
I
The message Complete ! will be displayed.
I
To adjust the clock, select the Year, Month, Day,
Hour or Min by pressing the Joystick(OK),
then move the Joystick up or down to set
respective values.
8. To exit, press the MENU button.
[ Notes ]
I
After the Lithium battery loses its charge (after about
6 months), the date/time appears on the screen as
00:00 1.JAN.2005.
I
You can set the year up to 2037.
I
If the Lithium battery is not installed, any input data will not be
backed up.
I
A separate Clock setting function is provided for the Digital Camera
(see page 91).
30 30
✤
✤
3
REC Mode
√System
Clock Set
√On
Remote
√On
Beep Sound
√English
Language
Demonstration √On
Move Select Exit
OK MENU
4
REC Mode
√System
Clock Set ...
1 JAN 2005
Remote
†
Beep Sound
00 : 00
Language
Demonstration
Adjust Select Exit
OK MENU
7
REC Mode
√System
Clock Set
1 JAN 2005
Remote
Beep Sound 00 : 00
Language
Complete !
Demonstration
Move Select Exit
OK MENU
I
I
I
I
I
I
I
I
I