Cd Program Playback Mode - Kenwood R-K731 Instruction Manual

CD
30
R-K731 R-K731

CD Program Playback Mode

You can select up to 30 tracks and play them in the order you like.
Press the [CDE] key to switch the input source to CD. Playback begins when you
switch the input source, so press the [F] key to stop playback.
If the CD is already playing, press the [F] key to stop playback.
1 1
CD
Press the [P.MODE] key to select program playback mode.
The mode changes as shown below each time you press the key.
PGM lit
Program
playback mode
MP3/WMA/AAC
1 Press the [P.MODE] key to select program playback
mode.
The mode changes as shown below each time you press the key.
N lit
Folder
playback mode
2 Press the [A ] or [B ] key to select the folder to be
used for program playback.
You can also use number keys to select the folder.
To select folder number 3, press the [3] key and then press the [ENTER] key.
For folder number 17, press the [1], [7] keys and then press the [ENTER] key.
For folder number 123, press the [1], [2], and then the [3] key.
PGM unlit
Cancel program
playback mode
PGM unlit
PGM lit
Cancel program
Program
playback mode
playback mode