Changing The Transmission Frequency - Kenwood KDC-CMP59FM Instruction Manual

10 disc mp3 cd autochanger / controller / fm modulator system
Hide thumbs Also See for KDC-CMP59FM:
Table of Contents

Advertisement

Operations

Changing the Transmission Frequency

1
To set the frequency change mode
Press the REP button for at least three seconds. The FREQ
indicator will light up and the currently set frequency will be
displayed.
F R E Q
NOTE
• The initial value is 88.3MHz.
• If this function is on, the functions other than power on / off,
reset, and modulation level / dynamic control, cannot be
operated.
• This function is not available when the random play, repeat play,
or scan play function is on. Before using this function, cancel
the other functions. This function cannot be used while loading
a disc (while the play indicator is blinking).
2
To change the frequency
Press either the 4 or ¢ button.
Each time you press the 4 or ¢ button, the mode switches
as follows :
87.7MHz
89.9MHz
87.9MHz
89.7MHz
88.1MHz
89.5MHz
88.3MHz (initial value)
89.3MHz
88.5MHz
89.1MHz
88.7MHz
88.9MHz
¢
¢
M H z
NOTE
Some car radios cannot receive a 87.7 MHz frequency.
To cancel :
Press the REP button on the display unit for at least three
seconds.
The FREQ indicator will go off and the frequency change will
take effect.
The frequency change mode is automatically canceled if you
do nothing for 15 seconds.
— 14 —

Advertisement

Table of Contents
loading

Table of Contents