Controls And Connectors; Display Section - Kenwood DPC-92 Instruction Manual

@ Condensation (dew)
@ When the unit is placed in a humid place or just after heater is turned on, condensation may
form inside the unit and unit may not function correctly. At that time, press the [ ll ] (STOP)
button twice to turn off the unit (when the button is pressed once, the unit only enters stop
mode), leave the unit for about 1 hour, then load a disc and start play.
@ Using headphones
type of vehicle.
® Be careful not to fall asleep while listening to music using headphones.
@ Continuous use of headphones for long periods may hurt your ears.
Controls and connectors <rig. 1>
@) [OPEN] button
@ [>i] [<4] SKIP, SEARCH button
@) [REPEAT] button
@) Display
© TIME BUTTON
Time display indicator selector
switch/TIMER alarm button
© [SCENE] select button
@ [GENRE/CHG] GENRE
select/CHARGE button
Display section <rig. 2;
1. [REPEAT] mode indicators
(ONE) ..... ""REPEAT-one"' play
(ALL) ..... ""REPEAT-all'' play
(RND) ..... "RANDOM" play
(INT) ..... "INTRODUCTION" play
. [P.MODE] indicator
. [EDIT] mode indicator
. [LAST MEMO] indicator
- [HOLD] indicator
. It blinks when the batteries are run-
ning out. It also blinks at relatively
long intreval during recharging.
Oahwn
[ @ ]/[OFF/CHG} button
STOP/ POWER OFF/CHARGE button
® [> 1N/[ON] button
PLAY/PAUSE/POWER ON button
[HOLD/LAST MEMO] select switch
@) [PHONES] jack
@® [VOLUME] UP/DOWN button
@ Remote control receptor
[DC IN] jack
(8) [DIGITAL OUT] jack
[LINE OUT] jack
7. Timer Alarm Indicator
8. Total elapsing time and total remain-
ing time.
9. [SCENE] indicator
10. [REMAINING TIME] indicator
11. [HIT MASTER] indicator
12. [GENRE] indicator
13. Elapsing time, total-recording time
and remaining time display.
14, Track number display
ppc-92 7