Table of Contents
Advertisement
Figure 69. Installing the filler bracket
Next steps
Replace the expansion
card.
Installing the expansion card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If required,
remove the air
Steps
1. Rotate to open the PCIe card holder.
2. If Installed, lift the metal filler bracket from the system.
NOTE:
Store the riser blanks for future use. Filler brackets must be installed in empty expansion card slots to maintain
Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the
system and aid in proper cooling and airflow inside the system.
Safety
instructions.
Before working inside your
shroud.
system.
Installing and removing system components
79
Advertisement
Table of Contents
