Expansion Card Riser; Removing The Expansion Card Riser - Dell PowerEdge C8000 Hardware Owner's Manual

Expansion Card Riser

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.

Removing the Expansion Card Riser

1 Remove the sled from the enclosure. See "Removing a Sled" on page 129.
2 Remove the front cover. See "Removing the Front Cover" on page 132.
3 Remove the expansion card. See "Removing the Expansion Card" on
page 148.
4 Remove the two screws securing the expansion card riser to the front cover.
See Figure 3-17.
5 Pull the expansion card riser away from the front cover. See Figure 3-17.
Figure 3-17. Removing and Installing the Expansion Card Riser
1 screws (2)
150
Installing System Components
Many repairs may only be done by a certified service technician. You
2 expansion card riser