Post Error Code; Collecting System Event Log For Investigation - Dell PowerEdge C8000 Hardware Owner's Manual

POST Error Code

Collecting System Event Log for Investigation

Whenever possible, the system BIOS will output the current boot progress
codes on the video screen. Progress codes are 32-bit quantities plus optional
data. The 32-bit numbers include class, subclass, and operation information.
The class and subclass fields point to the type of hardware that is being
initialized. The operation field represents the specific initialization activity.
Based on the data bit availability to display progress codes, a progress code
can be customized to fit the data width. The higher the data bit, the higher
the granularity of information that can be sent on the progress port. The
progress codes may be reported by the system BIOS or option ROMs.
The Response section in the following table may be divided into 3 types:
• Warning or Not an error – The message is displayed on the screen. An error
record is logged to the SEL. The system will continue booting with a
degraded state. The user may want to replace the erroneous unit.
• Pause – The message is displayed on the screen, an error is logged to the
SEL, and user input is required to continue. The user can take immediate
corrective action or choose to continue booting.
• Halt – The message is displayed on the screen, an error is logged to the
SEL, and the system cannot boot unless the error is resolved. The user
needs to replace the faulty part and restart the system.
Error Error Message
Code
0010h Local Console
Resource
Conflict
0011h Local Console
Controller Error
Response Error Cause
Pause Video device
initialization
failed
Pause Video device
initialization
failed
Corrective Actions
See "Troubleshooting the
Video Subsystem" on
page 178.
If the problem persists, see
"Getting Help" on page 203.
See "Troubleshooting the
Video Subsystem" on
page 178.
If the problem persists, see
"Getting Help" on page 203.
About Your System
19